ADL-1 Support

The ADL-1 is based on the Infinite Noise TRNG.

To find the firmware version on your ADL-1 power it on while holding down the generate button. The printer will print the firmware version.

Firmware 2.1.2 Files

ADL-1 Firmware Source

ADL-1 Firmware Rev 2.1.2

ADL-1 Manual Rev 1.4

Firmware  2.1.1 Files

AD1_1_Firmware_Source

ADL-1_Firmware_2.1.1

ADL-1_OTPF_MANUAL-1

 

 

To find the board revision remove the 6 1/16 inch hex screws holding the panel in the case and turn the panel over.

A revision 2.3 /2.3.1  board is blue or green and the left side looks like this:

A revision 2.2 board is green and the left side looks like this:

Board revision 2.3 Files

ADL-1 Bpard Revision 2.3 Schematic

Board revision 2.2 Files

ADL-1 Board Rrevision 2.2 Schematic